How to Easily and Safely Move a Hot Tub

Although moving a hot tub may seem like a difficult undertaking, it is possible to accomplish it safely and effectively with the correct equipment, methods, and planning. Knowing the best technique to transfer a hot tub is crucial, whether you are moving it within your property or moving it to a new residence. This manual offers a methodical way to guarantee a seamless and damage-free transfer.


Why Proper Hot Tub Moving Matters

Hot tubs are heavy and cumbersome, with weights ranging from 460 lbs. to over 1,000 lbs. when empty. Their size, shape, and delicate components mean improper handling can lead to costly damage. By using the right moving techniques, you can avoid unnecessary strain and potential injuries while ensuring the integrity of your hot tub move remains intact.

Hot Tub Weight & Capacity Chart

Weight (lbs.)

Capacity (Gallons)

Dimensions (inches)

Seats

950 lbs.

500 gallons

108 x 86.5 x 35.5

10

700 lbs.

400 gallons

85 x 85 x 36

6

590 lbs.

475 gallons

82 x 82 x 36

8

480 lbs.

300 gallons

81 x 81 x 34

7

460 lbs.

300 gallons

77 x 87 x 34

4

Safety Considerations: Precautions Before Moving

Moving a hot tub requires careful planning and proper execution to prevent injuries and damage. Keep these safety tips in mind:

  • Never lift a hot tub by yourself. Have at least three to four people assist.

  • Avoid standing under a tipped hot tub move. If it falls, it could cause serious injury.

  • Do not attempt to lift the tub entirely off the ground. Instead, use furniture dollies, rollers, or lifting straps.

  • Clear all pathways. Remove gates, fences, outdoor furniture, or low-hanging branches that could obstruct movement.

  • Protect delicate parts. Wrap the hot tub mover cabinet, pump, and jets in moving blankets to prevent damage.

  • Plan for spills. Water may remain in pipes even after draining, so have a wet-dry vacuum ready.

Pre-Move Preparation: Essential Steps

Proper preparation is key to a successful hot tub move. Follow these step-by-step instructions before lifting your hot tub mover:

Measure Pathways and Clearance

  • Ensure the hot tub move can fit through gates, doorways, and tight spaces.

  • Identify alternative routes if necessary.

Turn Off and Disconnect Power

  • Unplug the hot tub move from the GFCI outlet or shut off the circuit breaker if hard-wired.

  • Properly secure any electrical components.

Drain the Hot Tub

  • Use the built-in spigot or a submersible pump to drain the water completely.

  • Use a wet-dry vacuum to remove any remaining water from jets and pipes.

Clear Obstacles in the Path

  • Remove gates, fences, or furniture that may obstruct movement.

  • Cut back low-hanging tree branches if needed.

Wrap and Protect the Hot Tub

  • Use moving blankets to protect the cabinet, pump, and delicate components.

  • Secure with plastic wrap to prevent shifting during transport.

Gather Moving Equipment

  • Have all necessary tools ready, including dollies, lifting straps, PVC pipes, or a trailer, depending on your method of transport.

Methods for Moving a Hot Tub

There are multiple methods for moving a hot tub, each suited for different terrains and distances. Below are the four most effective approaches.

Method 1: Using Furniture Dollies (Best for Paved Surfaces)

Using furniture dollies is one of the safest and easiest ways to transport a hot tub over a short distance on a hard surface.This is one of the best ways to move a hot tub over short distances.

How to Easily and Safely Move a Hot Tub

Required Tools:
  • Two heavy-duty furniture dollies

  • Moving blankets and plastic wrap

  • Straps for securing the move a hot tub

Steps:
  1. Tilt the hot tub move on its side and carefully lift it onto the dollies with the help of three assistants.

  2. Secure the move hot tub with straps to prevent shifting.

  3. Slowly push the hot tub move to the new location, ensuring all pathways are clear.

  4. Once at the destination, carefully lower the move hot tub back onto its base.

Method 2: Rolling on PVC Pipes (Best for Grass and Uneven Ground)

How to Easily and Safely Move a Hot Tub


This method is ideal for how to move a hot tub from driveway to backyard over uneven surfaces.

Required Tools:
  • Three or four PVC sewer pipes (4-inch diameter)

  • A wooden lever to assist in lifting

Steps:
  1. Lift one side of the hot tub move using a wooden lever.

  2. Slide a PVC pipe underneath the raised edge.

  3. Push forward, rolling the move a hot tub while repositioning the rear pipe to the front.

  4. Repeat the process until the hot tub mover reaches the desired location.

Method 3: Moving with Lifting Straps (Best for Tight Spaces and Stairs)

How to Easily and Safely Move a Hot Tub


For how to move a jacuzzi hot tub in confined areas, lifting straps are an effective solution.

Required Tools:
  • Heavy-duty lifting straps

  • Four strong assistants

Steps:
  1. Slide lifting straps under the base of the hot tub mover.

  2. Position two people on each side, lifting in unison.

  3. Carefully walk the move hot tub to its new location.

  4. Lower it gently into place, ensuring stability.

Method 4: Using a Trailer for Long-Distance Transport

When considering how to transport a jacuzzi over long distances, using a trailer is the most reliable option.

Required Tools:
  • A flatbed trailer with a loading ramp

  • Heavy-duty ratchet straps

  • Padding for added protection

Steps:
  1. Load the hot tub move onto the trailer using dollies or lifting straps.

  2. Secure it with ratchet straps to prevent movement during transit.

  3. Drive cautiously, avoiding sudden stops and sharp turns.

  4. Unload with extra care to prevent damage.

Cost Comparison: DIY vs. Professional Hot tub Movers

Method

Estimated Cost

Best For

DIY with dollies

$30-$50

Short distances, easy terrain

DIY with PVC pipes

$10-$20

Grass, uneven surfaces

Moving with straps

$20-$40

Tight spaces, lifting over steps

Hiring Hot tub professionals

$200-$600

Heavy tubs, long-distance moves

For those wondering how much does it cost to move a hot tub, these cost-effective methods provide practical solutions. However, for challenging moves involving stairs or long distances, hiring a professional may be the safer.

Post-Move Setup: Ensuring Proper Installation

Once the hot tub move has been completed, follow these steps to set it up properly:

  • Reconnect Electrical Components: Ensure the wiring is properly installed before turning the power back on.

  • Refill with Water: Check for leaks before fully filling the tub.

  • Ensure the Ground Surface is Stable: Level the move a hot tub to prevent future issues.

  • Test Jets, Heater, and Filtration System: Ensure all components function correctly before first use.

  • Sanitize the Tub: Clean and balance the water before enjoying your newly relocated spa.

Final Verdict

Moving a hot tub requires careful planning, the right tools, and teamwork. Whether using dollies, PVC pipes, lifting straps, or a trailer, selecting the best way to move hot tub ensures a safe and damage-free hot tub move. If the process feels overwhelming, hiring professional hot tub mover services is always an option for peace of mind.


#hottubs, #pvcpipes, #liftingstraps, #dollies, #furnituremover, #hottubmove, #hottubservices, #hottubsale, #hottubtips, #movehottub, #furnituredollies


Post a Comment

0 Comments